Request a Free
Product Brochure

Accepted Payments

Video Products, Inc., Computers Dealers, Aurora, OH

Click to Zoom

Professional CCTV Tester with Power Over Ethernet (PoE) and IP Testing

Display and configure video; control PTZ; test cables, audio, IP network connections, PoE voltage; and power 12VDC cameras.

More details

Limited stock. All sales final on clearance items.

Buy/Quote
Overview
Specifications
Downloads

Overview

The TESTER-CCTVPOE-P Professional CCTV Tester with Power Over Ethernet (PoE) and IP Testing is a portable, multifunction tester for CCTV installations and maintenance. Power cameras and review the display without the hassle of running between the camera and a DVR located in a separate area. Test options include: audio, video, ping, TDR, PoE, IP network connections, and LAN (local area network) cable connections.

3.5" TFT-LCD with 480x320 resolution and up to 10x zoom.
Automatically adapts and displays NTSC or PAL video – generates the PAL/NTSC multi-system color bar for video testing and calibration.
Compact, hand-held size for easy operation.
Video level testing: video signals measured in IRE or mV.
12V DC, 1A power output for cameras.
Audio input testing.
Check IP address and Ethernet connection of the connected device.
Record and store images and video files.
PTZ (Pan-Tilt-Zoom) control:
- Pan, tilt and zoom
- Adjust focus and aperture
- Configure and activate preset position
- Supports more than twenty PTZ protocols.
- Scans PTZ camera ID.
Generates eight forms of PAL/NTSC color bar patterns.
Test LAN or telephone cables for connection status.
Displays wire sequence and serial number of cable tester.
Supports RS232, RS485 and RS422.
- Captures and displays RS485 data for troubleshooting.
- Baud rate: 600 to 115200 bps.
Tests the PoE voltage when a POE switch is supplying power to the IP camera.
- Displays the power+ and power- on the ethernet cable pins, each cable pin’s voltage and the failure connection of cable pin series numbers.
- Easily locate the connected port on the PoE switch by activating device port flicker.
TDR cable testing accurately measures BNC, Ethernet, and serial cable break-point and short-circuit locations.
USB-rechargeable Lithium-ion polymer battery.

Specifications

Connectors
- Three female BNC connectors for video input and output, and TDR cable break point and short circuit testing.
- Three female RJ45 ports for cable and PoE testing.
- One female 3.5mm stereo audio jack to test audio pickup.
- One 4-pin terminal block for RS232 interface.
- One 2-pin terminal block for RS485/RS422 interface.
- One female Mini USB Type A port for data transfer and battery charging.
- One micro SD slot for additional storage space.
  - Includes 4GB micro SD card.
Power
- Powered by a 3.7V Lithium-ion polymer battery, 3000 mAh.
  - Runtime: up to 11 hours
  - Recharge using included USB Type A male to Mini USB Type B male cable.
    - Connect the USB cable to the included 5V, 1.5A power adapter or a PC.
- Power output for camera: 12VDC, 1A.
Dimensions
- WxDxH (in): 4.41x1.89x7.56 (112x48x192 mm).
Environmental
- Operating temperature: 14 to 122°F (-10 to 50°C).
- Operating humidity: 30 to 90% non-condensing RH.
Video
- Signal mode: NTSC/PAL (auto adapts).
- Display: 3.5" TFT-LCD, 480x320 resolution
  - 10x image zoom available.
- LCD adjustments: brightness, contrast, and saturation.
- Video output mode: 1.0 Vp-p.
- Video level test: measured in IRE or mV.
Regulatory Approvals
- CE, FCC.
Warranty
- Two Years
PTZ Controller
- Communication: RS232, RS422 simplex and RS485.
- PTZ protocol: compatible with more than 30 protocols.
  - PELCO-D/P, Samsung, etc.
- 600, 1200, 2400, 4800, 9600, 19200, 57600, 115200 bps.
Video Signal Generation
- Eight different PAL/NTSC color bar video signals.
UTP Cable Test
- Test RJ45 or RJ11 cables for connection status.
PTZ Data Capture
- Reads and displays RS485 commands sent from controllers.
Weight
- 1.19 lb (540 g).
Power over Ethernet (PoE) Test
- Displays power+ and power- on each Ethernet cable pin.
- Port flicker feature sends signals to the connected PoE port, enabling quick identification.
IP connection
- Use IP address scan to discover the connected camera's IP address.
- Use Link monitor to check if the assigned IP address is occupied.
- Use Ping test to ensure the assigned IP address is correct and properly connected.
- IP camera video cannot be displayed on tester’s LCD.
TDR Test
- Accurately measures BNC, Ethernet, and serial cable break-point and short circuit locations.
Package Contents
- CCTV tester
- Power supply (5V, 1.5A)
- CAT5 cable tester
- Lithium-ion polymer battery
- BNC male to male cable
- RS485 cable with alligator clips
- Power cable for camera
- 3.5mm audio cable with alligator clips
- Carrying case
- Neck strap for carrying case
- Neck strap for CCTV tester
- Instruction manual