|
| COMPONENT VIDEO / AUDIO SPLITTER |
Enables two HDTV displays and speakers to be driven by a single
component YPbPr video device with stereo audio or digital audio. |
VOPEX-HDA-2 (Front & Back)
$90.00 each, order below |
|
Features & Specifications The Component Video / Audio Splitter enables two HDTV displays and speakers to be driven by a single component YPbPr video device with stereo audio or digital audio. Each input and output has component YPbPr video, L/ R analog audio, and digital audio on coax (S/PDIF).
- Supports High Definition and Standard Definition component YPbPr video, S-Video or composite video.
- Audio can be Left and Right stereo or digital S/PDIF.
- Supports S/PDIF, DTS Digital Surround™, and Dolby Digital™ 5.1 digital signals.
- Supports 480i (interlaced), 480p (progressive), 720i, 720p, 1080i, and 1080p formats.
- All audio/video inputs and outputs have RCA cable connectors.
|
| Specifications |
Video
- RCA connectors.
- Signal type: HDTV component YPbPr, S-Video, composite
- Inputs and outputs must be of the same format.
- Maximum input/output levels: 2Vp-p.
- Input/output impedance: 75 Ohms
- Video crosstalk: <-60dB
- Video gain: unity
- Bandwidth: >75MHz
- Resolutions: HDTV 480i, 480p, 720i, 720p, 1080i, and 1080p.
Digital Audio
- RCA connectors
- Signal type: S/PDIF, DTS Digital Surround™, Dolby Digital™ 5.1
- Inputs and output must be of the same format.
- Maximum input/output levels: 1Vp-p.
- Input/output impedance: 75 Ohms
|
Stereo Audio
- RCA connectors.
- Signal type: stereo audio, analog, left/right
- Maximum input/output levels: 2.5Vp-p.
- Input impedance: 10K Ohms
- Output impedance: 50 ohms
- Frequency Response: +/-0.03 dB, 20 Hz to 20 kHz.
- Total Harmonic Distortion + Noise (THD+N): 0.03% at 1kHz.
- Signal-to-Noise Ratio (SNR): >80 dBA
- Stereo Channel Separation: <-90 dBA
Power
- 110 or 220 at 50 or 60 Hz via AC adapter.
Dimensions |
 |
|
