|
COMPONENT VIDEO / AUDIO SWITCH
Share one HDTV display and speakers among
two YPbPr component video devices
 SE-HDA-2
$90.00, order below
|
Features & Specifications The SE-HDA-2 Component Video / Audio Switch enables one of two YPbPr component video devices (such as satellite, game box, DVD) to be played on a home theater system.
Each input and output has YPbPr component video, L/ R analog audio, and digital audio on coax (S/PDIF).
- Supports High Definition and Standard Definition YPbPr component video, S-Video or composite video.
- Audio can be left and right analog stereo or digital S/PDIF.
- Supports 480i (interlaced), 480p (progressive), 720i, 720p, 1080i, and 1080p formats.
- All audio/video inputs and outputs have RCA cable connectors.
- Switching can be done via front panel button.
|
| Specifications |
Video
- RCA connectors
- Signal type: HDTV YPbPr component, S-Video, composite
- Inputs and output must be of the same format.
- Maximum input/output levels: 2Vp-p
- Input/output impedance: 75 Ohms
- Video crosstalk: <-60dB
- Video gain: unity
- Bandwidth: >50MHz
- Resolutions: HDTV 480i, 480p, 720i, 720p, 1080i, and 1080p
Digital Audio
- RCA connectors
- Signal type: S/PDIF, DTS Digital Surround™, Dolby Digital™ 5.1
- Inputs and output must be of the same format.
- Maximum input/output levels: 1Vp-p
- Input/output impedance: 75 Ohms
|
Stereo Audio
- RCA connectors
- Signal type: stereo audio, analog, left/right
- Maximum input/output levels: 2Vp-p
- Input impedance: 10K Ohms
- Output impedance: 50 Ohms
- Frequency Response: +/-0.3 dB, 20 Hz to 20 kHz
- Total Harmonic Distortion + Noise (THD+N): 0.03% at 1kHz
- Signal-to-Noise Ratio (SNR): >80 dBA
- Stereo Channel Separation: <-59 dBA
Power
- 110 at 60 Hz via AC adapter.
Dimensions
|
|
