| Rackmount Composite Video / Stereo Audio Matrix Switch |
| Switch stereo audio & composite video signals from many video sources to multiple displays |
MTX-8X8-CVA-R (Front & Back)
$630 - $1,080, order below |
| Features & Applications |
| This rackmount composite video/stereo audio matrix switch routes stereo audio and video inputs from many video sources to multiple displays (projectors, monitors, etc.) and speakers. A single video source output can be routed to one or more displays. |
- Eliminate duplicate purchases of expensive equipment.
- No loss of signal.
- Control the switch through front panel buttons or RS232 (using provided software).
|
- Available in 4x4, 8x2, 8x4, 8x8
- 2RU rackmount case.
- Ideal solution for any application where information from many sources is being presented, such as: classrooms, conference rooms, and control rooms.
|
| Specifications |
Video Input- RCA composite video jacks.
- Supports NTSC/PAL/SECAM
- Impedance: 75 Ohms.
Video Output
- RCA composite video jacks.
- Supports NTSC/PAL/SECAM
- Impedance: 75 Ohms.
- Bandwidth: 4.7 MHz, fully loaded.
Audio Input
- RCA audio jacks (R&L).
- Signal type: Stereo, unbalanced
- Impedance: 10k Ohm.
Audio Output
- RCA audio jacks (R&L).
- Signal type: Stereo, unbalanced
- Impedance: 50 Ohms
- Frequency Response: 20 Hz to 20 kHz, +/-0.1 dB.
- Total Harmonic Distortion + Noise: 0.03% at 1kHz.
| Control Methods
- Front panel buttons allow you to make and break connections.
- LCD display shows which input device is being used by each output device.
- Included software provides fast switch control using an RS232 connection.
Power- 110 or 220 at 50 or 60 Hz via IEC connector.
Demensions
Package Includes:- Composite video/stereo audio matrix switch.
- RS232 communication cable.
- Power supply cable.
- Software CD
- User Manual
|
 |
|
