|
How to Wire a CAT5e Shielded Keystone Jack
- CAT5e Cable
- CAT5e Shielded Keystone Jack
- Cable Stripper
|
- 110 Punchdown Tool
- Cutters
|
|
Step 1. Strip outer sheath insulation back 1", roll back the foil shield insulation and tie the foil down with the drain wire. |
|
Step 2. Place the insulated conductor pair between the two contacts. Refer to the color code instructions below. Punch the conductor down using a 110 style tool. |
|
Step 3. Trim excess wire (if 110 tool does not cut). Snap on metal shield cover. |
Color Code Instructions |
Left Side |
T568B |
T568A |
White/Orange |
White/Green |
Orange |
Green |
White/Brown |
White/Brown |
Brown |
Brown |
|
|
Right Side |
T568A |
T568B |
White/Blue |
White/Blue |
Blue |
Blue |
White/Orange |
White/Green |
Orange |
Green |
|
|
|
|