|
How to Wire a CAT5e
Horizontal Keystone Jack
- CAT5e Cable
- CAT5e Horizontal Keystone Jack
- Cable Stripper
|
- 110 Punchdown Tool
- Cutters
|
 |
Step 1. Carefully strip the jacketing from the cable. Do not remove any insulation from the conductors. |
 |
Step 2. Place the insulated conductor pair between the two contacts. Refer to the color code instructions below. Punch the conductor down using a 110 style tool. |
 |
Step 3. Trim any excess wire (if 110 tool does not cut). |
| Color Code Instructions |
| |
T568B |
T568A |
| 2 |
Orange |
Green |
| 1 |
White/Orange |
White/Green |
| 7 |
White/Brown |
White/Brown |
| 8 |
Brown |
Brown |
|
 |
| |
T568A |
T568B |
| 3 |
White/Orange |
White/Green |
| 6 |
Orange |
Green |
| 5 |
White/Blue |
White/Blue |
| 4 |
Blue |
Blue |
|
|